-32%
5-Layer Cell Culture Flask, Plug Seal Cap (731001)
$131.00
Plug Seal Cap, Straight Neck, TC, sterile 1/pk, 8/cs
Supplier: Nest Scientific USA Inc.
- Description
- Size Guide
- Reviews (0)
Description
Materials:
High clarity medical grade polystyrene material
Product Features:
• Made of high clarity, 100% virgin polystyrene.
• Sterilized by E-beam, SAL=10-6.
• Non-Pyrogenic, DNase/Rnase free.
• Growth area: 870 cm².
• Individually Packaged in sterile bag.
Guidelines For Use:
4RP((H3$M.png)
Guidelines For Use:4RP((H3$M_ehiy.png)
1、Mix cell suspension with medium: Prepare cell suspension of required concentration in a container. Recommended volume is about 30- 50mL per layer.
2、Add the mixed liquid into the Multi-layer Flask slowly with serological pipettes. To avoid foam and bubbles, allow liquid stream to flow along the slope of the Multi-layer Flask. (Save a little
liquid in pipette each time.)
3、Tips: A 10 mL pipette allows media to be dispensed at the bottom of the vessel. A 25 mL pipette allows media to be dispensed just past the NEST Logo.
4、Hold the Multi-layer Flask upright with the Logo facing you and tilt clockwise to a 45° angle on a flat work surface to partition the liquid into each layer.
5、While holding the Multi-layer Flask at a 45° angle, gently lay it flat onto the work surface with logo facing up.
6、After placing the Multi-layer Flask flat on a work surface, gently rock back and forth and side-to-side to distribute cells evenly onto culture surfaces.
7、Tips: Be careful to avoid foaming of medium, and not to spill liquid from each layer.
8、Repeat Step 3 to put the flask quickly and slightly into the incubator . Then, lay it flat as shown in Step 4. You may choose to either aspirate or pour the media from Multi-layer Flask.
9、Aspirating method: To aspirate or remove media, tilt Multi-layer Flask, with the NEST Logo facing you, counter-clock wise to a 45° angle while inverting the Multi-Flask toward you. Then,
tilt Multi-layer Flask to the right, continuing to aspirate all residual media.
10、Pouring method: With Logo facing you, pour spent media from Multi-layer Flask
11、Tips: Aspirate media using a NEST 2 mL or 10mL aspirating pipette.
12、Wash with buffer for one time and add dissociating reagent (≥5mL per layer). Then, follow Steps 3-4 to distribute to dissociating reagent to each layer.
13、Neutralize with inactivating solution and mix following Steps 3-4. Gently swirl to dislodge cells completely.
14、Follow Step 7 “Aspirating Method” protocol and collect cell suspension using a NEST 10mL serological pipette.
15、Follow Step 8 “Pouring Method”. Pour the cell suspension into a NEST conical tube.
16、Rinse with additional wash buffer if needed.
17、Search “NEST Multi-layer Flask” video on NEST website or Youtube.
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
Reviews
There are no reviews yet.